Tester:
Sub Amp 1 DSP / Subwoofer amplifier with built in DSP module
Sub Amp 1 DSP is essentially the same amplifier as the Sub Amp 1, except for the DSP module. The use of DSP technology gives you superior ways to correct room problems, and achieve a sonic performance as good as possible in any room.
The room is part of your system, an unknown variable impossible to completely take into accunt when constructing a subwoofer. This is why most manufacturers choose to look the other way in this matter. Our way to cope with room problem is DSP, it can correct most of the resonances found, and at the same time adapt the sound character to whatever sound the listener prefers.
- Black piano paint
- 10 band graphic EQ
- 5 section parametric EQ
- 10 presets (3 pre programmed), delay, phase
- Control all settings from a PC
- Compatible with Room Analyzer
Technical Specifications::
Sub Amp 1 DSP
Construction type: Amplifier Class AB
Dimensions (HxBxD): 376 x 396 x 225 mm, sith feet it is 22 mm more
Weight: 18,5 kg
Power amplifier: 300W RMS in 4 ohm, 400W RMS in 2 ohm
Connections: Gold plated RCA, XLR Balanced input, Speaker input: Banana plug/Pole screw, Speaker output: Banana plug/Pole screw
Display:
•Graphic LCD display : 128 x 32 pixels, Blue.
•Input Gain display : 40, -24, -18, -12, -6, -3, -1, CLIP (- 0.2 dB)
•Auto On/Off
DSP facts
•Sampling frequency: 96 kHz
•Internal DSP resolution: 32 bits
•AD/DA converter: 24 bits
DSP functions
•Input Gain: 0 - 18 dB
•10-Band Graphical Equalizer 1/3 Octave
•Bands: 16, 20, 25, 31.5, 40, 50, 63, 80, 100, 125 Hz
•High-Pass Filter – frequency 80 - 250Hz in 1 or 10 Hz steps, slope 12 or 24dB
•Low-Pass Filter – frequency 10 - 40Hz in 1 Hz steps, slope: 12 or 24dB
•Polarity: Positive / Negative<
•Phase - 0-180 degrees in 10-degree steps, frequency coupled to the high-pass filter
•Delay - O - 100ms
•2-Band Notch Filter - 16-160 Hz, 0 to -24dB in 1 dB steps
•LCD Auto-Off - time On 0 - 30 minutes in 1 min steps
•Amplifier auto off - Time 0 - 30 min's in 1 min steps
•Presets - 10 complete subwoofer settings (3 Preinstalled)
•PC Remote Software - via the RS-232
Color:
•High glossy black painting (genuine piano painting)
Connections and settings:
•Stereo low level input, balanced input and high level (speaker) input.
•Auto On
•Volume control
•Heavy duty screw terminal connectors
•4pcs rubberfeet
•Software XTZ-remote (Download from filearchive)
Sub Amp 1 DSP
Construction type: Amplifier Class AB
Dimensions (HxBxD): 376 x 396 x 225 mm, sith feet it is 22 mm more
Weight: 18,5 kg
Power amplifier: 300W RMS in 4 ohm, 400W RMS in 2 ohm
Connections: Gold plated RCA, XLR Balanced input, Speaker input: Banana plug/Pole screw, Speaker output: Banana plug/Pole screw
Display:
•Graphic LCD display : 128 x 32 pixels, Blue.
•Input Gain display : 40, -24, -18, -12, -6, -3, -1, CLIP (- 0.2 dB)
•Auto On/Off
DSP facts
•Sampling frequency: 96 kHz
•Internal DSP resolution: 32 bits
•AD/DA converter: 24 bits
DSP functions
•Input Gain: 0 - 18 dB
•10-Band Graphical Equalizer 1/3 Octave
•Bands: 16, 20, 25, 31.5, 40, 50, 63, 80, 100, 125 Hz
•High-Pass Filter – frequency 80 - 250Hz in 1 or 10 Hz steps, slope 12 or 24dB
•Low-Pass Filter – frequency 10 - 40Hz in 1 Hz steps, slope: 12 or 24dB
•Polarity: Positive / Negative<
•Phase - 0-180 degrees in 10-degree steps, frequency coupled to the high-pass filter
•Delay - O - 100ms
•2-Band Notch Filter - 16-160 Hz, 0 to -24dB in 1 dB steps
•LCD Auto-Off - time On 0 - 30 minutes in 1 min steps
•Amplifier auto off - Time 0 - 30 min's in 1 min steps
•Presets - 10 complete subwoofer settings (3 Preinstalled)
•PC Remote Software - via the RS-232
Color:
•High glossy black painting (genuine piano painting)
Connections and settings:
•Stereo low level input, balanced input and high level (speaker) input.
•Auto On
•Volume control
•Heavy duty screw terminal connectors
•4pcs rubberfeet
•Software XTZ-remote (Download from filearchive)